SENDI MAHIR SDN BHD (SMSB) CALIBRATION SERVICES
Dimensional
Scope of Accreditation
Dimensional
Dimensional provides comprehensive calibration services, for highest accuracy dimensional measurement over the world, that are traceable to SI unit of length. Dimensional parameters supported by the program include length, flatness, roundness, diameter, surface roughness & 3D form.
SMSB have new accredited items & revision for the following items on 12th April 2010
- Plain Plug Gauge/ Pin Gauge
- Plain Ring Gauge
- External Micrometer
- Dial / Digimatic & Vernier
- Dial / Digimatic & Vernier Height Gaug
- Screw Plug
- Screw Ring
- Gauge Block set Grade ‘0’ and below
- Taper Plain Plug
- Taper Plain Ring
- Taper Thread Plug
- Taper Thread Ring
- Length Bar
- Long Series Gauge Block up to 500mm
Our Standards References
Long Serial Gauge Block & Gauge Block Set ‘K ’ – Use to calibrate industrial user items: caliper, micrometer, setting ring.
Universal Length Measuring (ULM) – Use to calibrate industrial user items : plug / ring gauge, thread plug/ring gauge, taper plug/ring gauge, pin gauge.
Gauge Block Calibrator – Use to calibrate industrial user items: gauge block (length, flatness & parallelism).
Co-ordinate Measuring Machine (CMM) – Size: 750mm x 1005mm x 605mm working area.
Testing services such as measurement of jigs, metal/steel based products.
Traceability
SAMM Accreditation by Department of Standards Malaysia (DSM)
- Sendi Mahir Sdn Bhd (Head Office)
- Procal Services Sdn Bhd
- Setianas Sdn Bhd
Annoucement
SMSB have new accredited items & revision for the following items on 12th April 2010
FIELD OF CALIBRATION : DIMENSIONAL
SCOPE OF ACCREDITATION
| Instrument Calibrated/ Measurement Parameter | Range | Best measurement capability Expressed as an uncertainty (±)* |
|---|---|---|
| Limit gauges Plain Plug Gauge/ Pin Gauge (Diameter) | above 100 mm to 300 mm | 0.2 µm 0.4 µm 1.0 µm |
| Plain Ring Gauge (Diameter) | 0 mm to 10 mm above 10 mm to 100 mm above 100 mm to 300 mm | 0.4 µm 0.5 µm 1.0 µm |
| Dial / Digimatic & Vernier Caliper | above 450 mm to 1000 mm | |
| Dial/ Digimatic & Vernier Height Gauge | above 600 mm to 1000 mm | 7.7 µm |
| Screw Plug | 0 mm to 20 mm above 20 mm to 100 mm | 0.5 µm 1.0 µm |
| Screw Ring | 0 mm to 20 mm above 20 mm to 100 mm | 0.5 µm 1.0 µm |
| Taper Plain Plug - Diameter - Angle | 0 mm to 20 mm above 20 mm to 300 mm 0 mm to 300 mm | 0.5 µm 1.0 µm 0.003 ° |
| aper Thread Plug - Diameter - Angle | 0 mm to 20 mm above 20 mm to 300 mm 0 mm to 300 mm | 0.5 µm 1.0 µm 0.002 ° |
| Taper Thread Ring - Diameter - Angle | 0 mm to 20 mm above 20 mm to 300 mm 0 mm to 300 mm | 0.5 µm 1.0 µm 0.002 ° |
| Length Bar | 125 mm 150 mm 175 mm 200 mm 250 mm 300 mm 400 mm 500 mm | 0.40 µm 0.40 µm 0.50 µm 0.50 µm 0.60 µm 0.7 µm 0.90 µm 1.10 µm |