Dimensional Laboratory

Dimensional Laboratory provides comprehensive calibration services, for highest accuracy dimensional measurement over the world, that are traceable to SI unit of length. Dimensional parameters supported by the program include length, flatness, roundness, diameter, surface roughness & 3D form.

ANNOUCEMENT :
SMSB have new accredited items & revision for the following items on 12th April 2010

Plain Plug Gauge/ Pin Gauge Plain Ring Gauge External Micrometer Dial / Digimatic & Vernier Dial/ Digimatic & Vernier Height Gaug Screw Plug Screw Ring	Gauge Block set Grade ‘0’ and below Taper Plain Plug Taper Plain Ring Taper Thread Plug Taper Thread Ring Length Bar Long Series Gauge Block up to 500mm
Go for Details

OUR STANDARDS REFERENCES

Long Serial Gauge Block & Gauge Block Set Grade ‘00 ’ - Use to calibrate industrial user items: caliper, micrometer, setting ring.

Universal Length Measuring (ULM) - Use to calibrate industrial user items : plug / ring gauge, thread plug/ring gauge, taper plug/ring gauge, pin gauge.

Gauge Block Calibrator - Use to calibrate industrial user items: gauge block (length, flatness & parallelism).

Co-ordinate Measuring Machine (CMM) - Size: 750mm x 1005mm x 605mm working area.
Testing services such as measurement of jigs, metal/steel based products.

TRACEABILITY

All our reference standards are traceable to National Metrology Laboratory, Malaysia (NML) or International Standard. (Download Traceability Chart)

SAMM Accreditation by Department of Standards Malaysia (DSM)

Laboratory & Site Calibration:
- Sendi Mahir Sdn Bhd (Head Office)
- Procal Services Sdn Bhd
- Setianas Sdn Bhd

ANNOUCEMENT :
SMSB have new accredited items & revision for the following items on 12th April 2010

FIELD OF CALIBRATION : DIMENSIONAL

SCOPE OF ACCREDITATION

Instrument Calibrated/ Measurement Parameter	Range	Best measurement capability Expressed as an uncertainty (±)*

Limit gauges Plain Plug Gauge/ Pin Gauge (Diameter)	above 100 mm to 300 mm	0.2 µm 0.4 µm 1.0 µm

Plain Ring Gauge (Diameter)	0 mm to 10 mm above 10 mm to 100 mm above 100 mm to 300 mm	0.4 µm 0.5 µm 1.0 µm

Dial / Digimatic & Vernier Caliper	above 450 mm to 1000 mm

Dial/ Digimatic & Vernier Height Gauge	above 600 mm to 1000 mm	7.7 µm

Screw Plug	0 mm to 20 mm above 20 mm to 100 mm	0.5 µm 1.0 µm

Screw Ring	0 mm to 20 mm above 20 mm to 100 mm	0.5 µm 1.0 µm

Taper Plain Plug
- Diameter	0 mm to 20 mm above 20 mm to 300 mm	0.5 µm 1.0 µm
- Angle	0 mm to 300 mm	0.003 °

Taper Plain Ring
- Diameter	0 mm to 20 mm above 20 mm to 300 mm	0.5 µm 1.0 µm
- Angle	0 mm to 300 mm	0.003 °

Taper Thread Plug
- Diameter	0 mm to 20 mm above 20 mm to 300 mm	0.5 µm 1.0 µm
- Angle	0 mm to 300 mm	0.002 °

Taper Thread Ring
- Diameter	0 mm to 20 mm above 20 mm to 300 mm	0.5 µm 1.0 µm
- Angle	0 mm to 300 mm	0.002 °

Length Bar	125 mm 150 mm 175 mm 200 mm 250 mm 300 mm 400 mm 500 mm	0.40 µm 0.40 µm 0.50 µm 0.50 µm 0.60 µm 0.7 µm 0.90 µm 1.10 µm